Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Irvine, CA
We provide independent Mr-Glass service across Irvine, from frameless shower enclosures in Westpark to sliding bypass doors in Northwood and window-and-door glass in the Spectrum condos, and we also cover nearby areas like North Tustin Mr-Glass service. We’re not a factory-authorized dealer, but a local general contracting shop that knows how Mr-Glass hardware behaves after a few Santa Ana wind seasons and a dry Irvine summer. That means we quote, template, and repair around the way glass actually fails here, not the way a brand brochure says it should. Call (877) 752-3951 for a free estimate.
Why Irvine Residents Choose Us for Mr-Glass Service
We’ve spent years installing and servicing Mr-Glass shower enclosures, mirror and vanity glass units, and window-and-door glass across Irvine’s villages. Our work gets judged by village design-review boards and city plan check, not a brand rep. Noel Carranza, who owns Sundance Contractors, worked his way through every phase of residential and commercial builds across Orange County before landing here, and he’s the one who sets our repair-vs-replace standard: if the glass is sound and only the hardware or seal has failed, we repair. If a panel is chipped at a hinge or an opening is badly out of square, we re-template and replace.
That single point of accountability matters for Mr-Glass work because the enclosure is never the whole job. There’s tile, curb work, waterproofing, sometimes a full bathroom remodel behind it. You won’t need to find a separate glass crew, a separate tile setter, and a separate plumber. We handle the glass and everything around it under one contract.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Irvine
Here’s what we actually see in Irvine homes, tied to the local housing and climate as much as to the hardware itself.
- Frameless pivot doors binding or dropping at the hinge. Irvine’s dry heat and the daily door-cycle load loosen header anchors over time, especially on tile-over-backer installs in 1980s-2000s Westpark and Northwood baths. A dragging door usually means a worn pivot hinge or a pulled anchor, not a bad door.
- Sliding bypass tracks packing with dust during Santa Ana events. The winds push fine grit and debris into the aluminum track. Rollers flat-spot, and the door drags or jumps the track entirely. We pull the door, clean and re-lubricate the track, and replace the rollers with Mr-Glass OEM or a quality aftermarket equivalent where the profile is current.
- Seal and sweep failure letting water migrate to the curb and drywall. You’ll see paint bubbling or stucco staining on the bathroom side of the wall. The leak isn’t always the glass, it’s the sweep gasket that flattened out over a few dry summers. We replace the sweep and re-seal the curb join.
- Stress on fixed panels and siliconed joints in older tracts. Rancho San Joaquin and Turtle Rock homes from the 1960s and 70s rarely have square openings. Forced panels put stress on the silicone and the gasket line, leading to hairline edge chipping and gasket fatigue. We re-shim and re-template around the actual installed condition.
- Finish mismatches on HOA-governed replacements. A new Mr-Glass enclosure in Woodbridge or University Park isn’t just a glass choice. The finish profile, frame color, and hardware style all matter to the architectural review. We capture the approved finish profile before ordering glass so the install doesn’t stall out at design review.
Mr-Glass Service in Irvine: What Local Conditions Mean for Your Equipment
Irvine is a master-planned city built almost entirely by the Irvine Company on a village-by-village model, and that changes how Mr-Glass work gets done here compared to Santa Ana or Tustin. A Mr-Glass enclosure swap can pass city plan check and still get held up by a village HOA or Irvine Company design-review submittal over visible fixture finish, frame color, or hardware style. We’ve seen homeowners in Northwood wait weeks on a simple glass door because the oil-rubbed bronze hardware didn’t match the village’s approved finish schedule. So we do something a generic Mr-Glass page never mentions: we capture the approved finish profile before ordering glass. That’s why a homeowner on a cul-de-sac off Trabuco Road can get a frameless pivot enclosure re-templated and installed without a design-review stop-work surprise. In a 1990s Westpark stucco tract off Culver, our crew re-templated a Mr-Glass frameless pivot enclosure after the original door started dropping and the header anchor pulled loose in a dry-season bath. We replaced the OEM pivot hinge and wall anchors, re-shimmed the fixed panel to the actual out-of-square curb, and re-sealed the sweep. The enclosure now closes clean with no water tracking onto the adjacent painted drywall.
Mr-Glass Models & Products We Service in Irvine
We work on Mr-Glass frameless pivot and hinged shower enclosures in 10mm and 3/8-inch tempered glass, sliding bypass tub and shower glass doors, custom mirror and vanity glass units, and window and door replacement glass (IGU and laminated) for Irvine’s stucco-tract homes. On parts, the rule is simple: we use Mr-Glass OEM hinges, rollers, and sweeps where the current profile keeps the warranty-adjacent geometry intact. Where an OEM part is discontinued or overpriced, we move to a quality aftermarket equivalent and tell you why before we order it. We keep common Mr-Glass roller and sweep profiles in stock locally so most Irvine service calls don’t wait on a freight truck from a warehouse in the Inland Empire. For larger glass or replacement panel work, we template on-site and order from our own suppliers, which keeps the turnaround shorter than the average big-box special-order window.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Irvine
What you’ll pay in Irvine tracks the scope, not the zip code. A full walk-in shower install with a Mr-Glass frameless panel runs higher than a simple shower replacement because there’s tile, waterproofing, and curb work involved. Here’s the line-item range for the Mr-Glass work we handle most often:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
The bigger variable in Irvine is what’s behind the glass. A 1970s Turtle Rock bath with out-of-square walls and original backer will take more re-shimming and waterproofing than a 2015 Great Park condo. That’s why our free estimate includes a site measure and an honest read on the tile, curb, and drywall condition, not just the glass. Call (877) 752-3951 to schedule yours.
Serving Irvine, CA - Our Local Coverage Area
We serve Irvine and nearby communities. Also see Mr-Glass repair in Fountain Valley. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Irvine
In most Irvine villages, yes. A replacement shower enclosure isn’t usually a structural permit item, but visible finish, frame color, and hardware style often fall under CC&R or design-review standards. We check the submittal requirements for your specific village and capture the approved finish profile before ordering glass, so the project doesn’t stop mid-stream. Call (877) 752-3951 if you’re not sure whether your enclosure swap needs review.
Dry-season heat plus daily door cycles loosen the header anchor or wear the pivot hinge, which drops the door a few millimeters, and that’s all it takes to drag or bind. We re-tension or replace the pivot, re-anchor the header, and re-shim the fixed panel to the actual curb so the door closes clean again. In most cases the glass is fine, and a repair is cheaper than a full replacement. Call (877) 752-3951 for an exact quote.
Almost always. The problem is almost never the glass. Santa Ana dust packs the aluminum track, the rollers flat-spot, and the door drags or pops out. We pull the door, clean and re-lubricate the track, and install new rollers matched to the profile. If the glass is sound, you keep it. If the track is bent or the door is badly scored, we’ll tell you that too before quoting anything. Call (877) 752-3951.
Yes. We match visible finish, frame color, and hardware style against the approved profile for your building, and we can reference the manufacturer’s current finish codes where the hardware line is still active. If the original finish is discontinued, we’ll show you the closest current match and make sure it passes design review before we order. Call (877) 752-3951 to go over your current enclosure.
We handle the whole opening. A Mr-Glass enclosure sits on a curb that has to be level, waterproofed, and tied into the wall tile correctly. We do the glass, the curb, the tile, the plumbing fixtures, and any drywall repair around the opening under one contract and one schedule. That’s the whole reason Sundance exists: one contractor, every phase. Call (877) 752-3951 for a free estimate.
Service Areas Near Irvine
We serve all of Irvine’s ZIP codes – 92617, 92618, 92619, and 92620 – and the surrounding Orange County cities. If you’re in Yorba Linda, Placentia, Villa Park, Brea, Fullerton, or Anaheim, we can help. For broader coverage, see our Irvine service area page, our Mr-Glass sales & service overview, Mr-Glass service in Eastvale, or Mr-Glass service in Ontario.
Book Your Mr-Glass Service in Irvine Today
Do it right the first time – the second time costs twice as much and nobody’s happy about it. Call (877) 752-3951 today to schedule your free Mr-Glass estimate in Irvine. We’ll come out, measure the opening, check the tile and curb, and give you a written line-item quote before any work starts.
Written by Noel Carranza, Owner at Sundance Contractors, serving Irvine and Orange County since his first construction days in Yorba Linda.