Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Irvine, CA
We provide independent Unilock paver and wall installation, repair, and replacement across Irvine, CA. What makes our Unilock work here different is that we treat Irvine’s village-by-village design-review process as the binding constraint on every job, not just the city permit. If you’re planning a Unilock driveway, patio, or garden wall, call Noel Carranza and the team at Sundance Contractors at (877) 752-3951 for a free estimate.
Why Irvine Residents Choose Us for Unilock Service
We’ve set Unilock pavers across Irvine’s villages long enough to know which series survive Santa Ana wind seasons and which base details fail on decomposed-granite subgrade. We work independent of Unilock, no authorization, no factory warranty backing, so our spec is built from what actually holds up on Turtle Rock and Woodbridge jobs, not a dealer sheet.
Noel grew up in Yorba Linda, spending weekends at Yorba Regional Park while his father framed houses in the surrounding hills. He studied construction technology at Fullerton College before working through every phase of residential and commercial builds across Orange County. For the better part of two decades, he’s been the general contractor Irvine homeowners call for paver work that outlasts design-review resubmissions. Do it right the first time, the second time costs twice as much and nobody’s happy about it.
Our Unilock sales & service work means we know exactly which series, profile, and joint treatment clears each village’s architectural committee the first time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in Irvine
- Joint sand washout on wind-scoured slopes: Santa Ana events scour loose polymeric sand from paver joints before the first season ends if edge restraint isn’t spec’d tight. We see this most on exposed ridgeline lots in Turtle Rock and on south-facing slopes where wind channels between stucco tracts.
- Efflorescence bloom on fresh installs: Irvine’s hard water plus irrigation overspray hitting a new paver field before the surface seals leaves a white chalky residue across Brussels Dimensional and Beacon Hill runs. We correct the surface chemistry and reseal before the bloom stains permanently.
- Base migration and rutting on decomposed-granite subgrade: Older ranch-tract lots in Rancho San Joaquin and University Park sit mostly on DG soil. Without proper compaction and a geotextile separator, a paver driveway will rut inside three years. We re-excavate, re-compact, and re-lay on a sound base rather than topping off a sinking field.
- Color fade and surface spalling on south-facing patios: Irvine’s UV load is relentless on unprotected pavers. We’ve seen Beacon Hill flagstone pavers on Spectrum-adjacent townhome patios chalk and delaminate within five years when specified without a UV-stable finish. Replacement with a sealed, stabilized paver is the fix.
- Design-review rejection after city plan check passes: This one is uniquely Irvine. A homeowner passes city permits, orders pavers, and the village architectural committee rejects the color or laying pattern. We submit the correct Unilock series and pattern to the specific village before a single pallet is ordered.
Unilock Service in Irvine: What Local Conditions Mean for Your Equipment
Irvine’s master-planned village model means an approved Unilock paver color and laying pattern for a driveway in Woodbridge can be rejected outright in Turtle Rock or Northwood, because each village HOA and the Irvine Company design-review process carries its own paver palette and pattern standards, so on Irvine jobs we submit the Unilock series and laying pattern to the specific village architectural committee before ordering a single pallet. This is not true in Santa Ana or Tustin. Those cities have standard municipal permitting and no village-level design review. In Irvine, a homeowner can pass city plan check and still be stopped by design review over paver color, profile, or edge detail. We’ve built our whole Unilock pre-construction process around that reality, pulling village-specific standards before spec’ing a single paver. On a Turtle Rock driveway off Ridgeline, the homeowner had passed city plan check on a Unilock Brussels Dimensional driveway only to be stopped at village design review because the proposed color didn’t match the tract’s approved palette. We pulled the village’s paver standards, resubmitted in the compliant tone with a running-bond pattern, and rebuilt the base over the decomposed-granite subgrade with proper compaction before laying, and the drive passed re-review and has held through two Santa Ana seasons without joint washout.
Unilock Models & Products We Service in Irvine
We work with the Unilock series that actually show up on Irvine jobs: Brussels Dimensional for tumbled, block-style patio and walkway runs, Beacon Hill for irregular flagstone-look driveway aprons and pool decks, Uni-Stone for low garden and seat walls, and Town Hall when a homeowner wants a clay-brick look for a traditional Mediterranean elevation. On parts, we use genuine Unilock pavers and Unilock’s own edge restraint where the profile requires it. Polymeric joint sand and base aggregate come from suppliers who spec to Irvine’s DG and irrigation realities. If a paver field is sound but joint sand and edge restraint have failed, we re-sand and re-restrain rather than tear out. Full replacement only makes sense when base failure is structural.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Irvine
Here’s what Unilock paver work typically runs in Irvine. These ranges are based on the projects we’ve done across the villages:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives the number: subgrade condition (DG lots in Rancho San Joaquin and University Park need deeper excavation and compaction), village-required paver series, edge restraint profile, and whether we’re replacing a failing base or re-sanding a sound field. A free estimate includes a paver field assessment, base inspection where accessible, and a written line-item quote with no change orders. Call (877) 752-3951 for an exact number.
Serving Irvine, CA - Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Irvine
Yes, it happens regularly. Each Irvine village, Woodbridge, Turtle Rock, Northwood, University Park, has its own architectural review committee with its own approved paver palette and laying pattern standards. The city permit and the village design review are separate gates. That’s why we submit your specific Unilock series and pattern to the village committee before ordering pavers. Call (877) 752-3951 and we’ll pull your village’s standards for you.
We excavate to the appropriate depth, lay a geotextile separator, and compact the base in lifts before setting pavers. On older ranch-tract lots in Rancho San Joaquin and University Park, DG subgrade is common, and skipping compaction or the separator is the main reason paver driveways rut within a few years. For an exact assessment of your lot, call (877) 752-3951. Estimates are free.
Santa Ana wind events scour loose polymeric sand from paver joints when edge restraint isn’t tight and the sand wasn’t activated properly. On exposed Turtle Rock ridgelines and south-facing slopes, the wind hits harder and the sand goes faster. We re-sand and re-restrain before the base starts migrating. Call (877) 752-3951 if your joints are emptying out after the first season.
Sometimes, but only if the concrete slab is structurally sound and doesn’t have active cracks or drainage problems. In Irvine’s climate, a stable slab can serve as a base for a Unilock overlay, but we won’t lay pavers over a slab that’s spalling or shifting. We’ll inspect it first. Call (877) 752-3951 to schedule a free look.
Yes. The city of Irvine requires a permit for new or replaced driveway paving, and on top of that, your village HOA or the Irvine Company design review needs to approve the paver color, series, and laying pattern. We coordinate both, submitting the city permit package and the village design-review submittal at the same time. Call (877) 752-3951 and we’ll walk you through the sequence for your village.
Service Areas Near Irvine
Our Unilock work extends beyond Irvine service area into Yorba Linda, Placentia, Villa Park, Brea, Fullerton, and Anaheim. If you’re in a neighboring city with a similar HOA or design-review structure, our pre-submittal process works the same way. We also provide Unilock service in Eastvale and Unilock service in Ontario.
Book Your Unilock Service in Irvine Today
If you’re planning a Unilock paver project in Irvine, get the design-review piece right before you order a single paver. Call Noel and the Sundance Contractors team at (877) 752-3951 for a free estimate. We’ll inspect your site, pull your village’s standards, and give you a written number.
Written by Noel Carranza, Owner at Sundance Contractors, serving Irvine since day one.